Uwell Caliburn G Replacement Pods
Refresh your vape with Uwell Caliburn G Replacement Pods and enjoy the freedom to choose your own e-liquid, coil resistance and vaping style. Each refillable 2ml pod features a practical top-fill design and works with replaceable Caliburn G coils, so you can change the coil without discarding the cartridge. The 0.8Ω mesh option produces rich flavour and smooth vapour, while the 1.0Ω coil supports a more restrained MTL draw.
Pod orientation gives you two airflow options, allowing a tighter or more open inhale. Keep a spare cartridge ready for your daily setup, change flavours when you like and explore our wider Uwell range for compatible kits, coils and accessories.
Why Choose Uwell Caliburn G Replacement Pods?
2ml Capacity for Longer Sessions
The 2ml tank gives you enough room for regular vaping while keeping the pod compact and pocket-friendly. Fill it with your preferred e-liquid and monitor the level through the transparent cartridge.
Refill the pod before the e-liquid runs too low. Keeping the coil covered helps support consistent flavour and reduces the chance of a dry, burnt taste.
Removable Coils to Reduce Waste
The removable coil system means you replace the small coil rather than the entire pod. This can make ongoing vaping more economical and gives you greater control over your setup.
Once the coil reaches the end of its useful life, pull it from the base of the pod and fit a compatible Caliburn G replacement coil. The cartridge can continue to be used while it remains in good condition.
0.8Ω Mesh Coil for Fuller Flavour
The 0.8Ω UN2 mesh coil heats e-liquid evenly across its surface. It is a strong choice when you want richer flavour, smooth vapour and a slightly more open draw.
Mesh coils can deliver a lively vape at moderate power. Use the coil within its recommended wattage range and take steady puffs to enjoy the best performance.
1.0Ω Coil for a Tighter MTL Draw
The 1.0Ω coil offers a more restrained vaping experience. It suits MTL users who prefer a tighter inhale, lower vapour production and a cooler draw.
Pair it with an appropriate e-liquid and moderate wattage. This setup can work well for vapers who enjoy a controlled, cigarette-style inhale. Having both coil options lets you adjust the experience without changing your Caliburn G device.
Top-Fill Refilling for Quick Changes
The top-fill format lets you refill the pod without removing it from the device. Remove the top section, add your e-liquid through the fill port and secure the pod before vaping.
Avoid filling into the central airflow chimney. Wipe away any excess e-liquid and check that the top section is properly fitted. A secure fill area helps you move between refills with less interruption, especially when you are using the device throughout the day.
Two Airflow Styles from One Pod
The pod can be installed in different directions to alter the airflow. One position creates a tighter MTL draw, while the other provides a more open restricted direct-to-lung experience.
A tighter airflow suits higher-resistance coils and controlled vapour. The more open option can pair well with the 0.8Ω mesh coil for a fuller inhale. Test both positions with short, gentle puffs. Your preferred setting may depend on the coil, e-liquid and wattage you select.
Plug-and-Play Coil Installation
The compatible coils use a push-fit design. Remove the old coil from the base of the pod and press the new one into position until it sits securely.
Make sure the coil is aligned correctly before filling. A firm fit helps the pod work as intended and reduces the chance of e-liquid escaping through the base. This system keeps coil changes simple for new vapers while giving experienced users quick access to their preferred resistance.
Uwell Caliburn G Replacement Pods Specifications
|
Feature |
Details |
|
Product type |
Refillable replacement pod |
|
Pod capacity |
2ml |
|
Filling method |
Top fill |
|
Coil system |
Removable plug-and-play coils |
|
Compatible coils |
0.8Ω mesh and 1.0Ω Caliburn G coils |
|
Vaping styles |
MTL and restricted direct-to-lung |
|
Airflow |
Two settings through pod orientation |
|
Compatible devices |
Caliburn G and compatible Caliburn G pod systems |
|
Compatible e-liquid |
Balanced 50/50 e-liquid recommended |
|
Pod connection |
Press-fit connection |
|
Use |
Refillable e-liquid system |
Uwell Caliburn G Pods System Compatibility
Compatible devices may include:
-
Uwell Caliburn G.
-
Uwell Caliburn Koko PRIME.
-
Other devices that specifically use Caliburn G replacement pods.
The Caliburn G pod should not be confused with newer GPP or G3 cartridges. The Caliburn G4 uses compatible GPP and G3 pod types, not the older Caliburn G replacement pod format.
Select the Right Caliburn G Coil
Your chosen coil changes the warmth, vapour production and draw of the Uwell Caliburn G.
|
Coil resistance |
Vaping style |
Suitable use |
|
0.8Ω mesh |
MTL or restricted direct-to-lung |
Fuller flavour and increased vapour |
|
1.0Ω standard |
MTL |
Tighter draw and lower vapour output |
The 0.8Ω mesh coil is ideal when flavour is your priority. The 1.0Ω coil suits a calmer, more controlled inhale.
Check the wattage range printed on the coil packaging. Start at the lower end and increase gradually until the vape feels comfortable.
Choose a Suitable E-Liquid
A balanced 50/50 e-liquid is a useful starting point for these pods. It flows easily through the coil and suits both MTL and restricted direct-to-lung vaping.
Nicotine salts can work well with the 1.0Ω coil or a higher-resistance setup. A suitable freebase e-liquid can also be used when the nicotine strength and coil resistance match your preference.
Avoid very high-VG e-liquids in these smaller pod cartridges. Thicker liquids may not wick efficiently and can affect flavour or coil performance.
How to Fill Uwell Caliburn G Replacement Pods
Follow these steps whenever you refill the cartridge:
-
Remove the pod or hold it securely in the device.
-
Take off the top section to access the fill port.
-
Add e-liquid slowly through the correct opening.
-
Avoid the central airflow chimney to prevent flooding.
-
Leave a small air gap instead of filling beyond the maximum level.
-
Refit the top section firmly.
-
Wipe away excess e-liquid around the pod.
-
Wait before vaping if you have just installed a new coil.
Check the pod after filling. If you notice gurgling, remove it from the device and wipe the contacts before taking another gentle puff.
How to Replace the Caliburn G Coil
A fresh coil can restore flavour when the old one becomes worn. Use this process:
-
Empty the remaining e-liquid from the pod.
-
Remove the pod from the device.
-
Pull the old coil from the base.
-
Prime the new coil by adding a few drops of e-liquid to its visible cotton.
-
Push the replacement coil into the pod base.
-
Refill the pod.
-
Leave it to stand for several minutes.
-
Begin vaping at a low wattage.
Priming gives the e-liquid time to reach the cotton. Starting at high power immediately can cause a dry or burnt taste.
Signs Your Pod Needs Replacing
The coil is usually the first component to need changing. The pod body may need replacing when it shows physical wear or no longer holds e-liquid securely.
Replace the cartridge if you notice:
-
Cracks in the pod.
-
A loose or damaged top section.
-
Persistent leaking after fitting a new coil correctly.
-
Damaged contacts.
-
A poor connection with the device.
-
E-liquid escaping from the fill area.
-
A cartridge that no longer sits securely.
Changing the coil will not correct damage to the cartridge itself. A fresh pod provides a better base for your replacement coil and e-liquid.
What Comes in the Pack?
The pack contains:
-
Two Uwell Caliburn G replacement pods.
Compliance and Responsible Use
|
UK guidance |
What it means for you |
|
Empty pod |
Supplied without e-liquid or nicotine. |
|
Age restriction |
Nicotine e-liquid is for adults aged 18 and over only. |
|
E-liquid choice |
Use e-liquid with UK-compliant packaging and labelling. |
|
2ml capacity |
Do not fill beyond the pod’s maximum level. |
|
Coil use |
Use compatible coils and follow their wattage guidance. |
|
Safe storage |
Keep pods and e-liquid away from children and pets. |
|
Damaged pod |
Stop using it if it cracks, leaks or becomes damaged. |
|
Disposal |
Dispose of used pods and coils responsibly. |
Frequently Asked Questions
The pods are supplied without coils unless the pack description says otherwise. Compatible 0.8Ω mesh and 1.0Ω Caliburn G coils are purchased separately.
There is no fixed refill limit. Pod lifespan depends on e-liquid, coil changes, cleaning and daily use. Replace the pod when it becomes damaged or no longer holds e-liquid securely.
You can rinse the empty pod with cold water when changing flavours, but allow it to dry completely before fitting a coil or adding e-liquid. Do not wash the coil.
Leaking can result from an incorrectly fitted coil, overfilling, damaged seals, a loose top section or a worn cartridge. Check the pod and replace damaged parts.
Yes. Nicotine salts can suit these pods when paired with an appropriate coil resistance and nicotine strength. Check the e-liquid guidance before vaping.
Remove the old e-liquid, clean and dry the pod, then fit a fresh coil if needed. A small amount of the previous flavour may remain until the new e-liquid fully saturates the coil.
```
DELIVERY INFORMATION
Orders are shipped Monday to Friday excluding bank holidays via DPD.
Orders placed and paid for before 2pm Monday - Friday will be shipped via DPD for next working day delivery.
Delivery addresses must match billing information. Track your order via your account dashboard.