Geekvape Kits at Local Supplies cover the Sonder Q series – refillable pod kits built around one shared cartridge system. Whichever Geekvape pod kit you choose, the same Q Series pods fit, so moving up or down the range later does not mean starting again with new consumables.
That shared-pod approach is what makes this a practical range to buy into rather than a collection of unrelated devices. Every kit here is inhale activated, charges over USB-C, and supports both MTL and RDL vaping simply by changing the pod resistance. Browse the full Geekvape range for kits, pods and tank spares together.
Geekvape kits at a glance:
- Three Sonder pod kits stocked: the Sonder Q, Sonder Q2 and Sonder Q3
- Entry point from £4.95, with the Sonder Q at £8.99
- All three take the same Geekvape Q Series cartridges
- Four Q pod formats available: 2ml and 3ml, side-fill and top-fill, from £3.45 per 3-pack
- Pod resistances from 0.4Ω to 1.2Ω, covering MTL through to RDL
- For adults aged 18 and over only
Geekvape Kits in This Collection
- Geekvape Sonder Q Pod Kit – £8.99 The core Sonder Q vape and the most popular of the three. A 1000mAh battery, up to 20W, and 0.6Ω, 0.8Ω and 1.2Ω pod options. Well stocked and the sensible default. Shop the Geekvape Sonder Q pod kit.
- Geekvape Sonder Q2 Vape Kit – £4.95 The cheapest way into the Q pod system, and a sound choice as a backup device or a first refillable kit. Uses the same Q Series cartridges as the rest of the range. Shop the Sonder Q2.
- Geekvape Sonder Q3 Pod Kit The largest of the three: a 1750mAh battery, up to 30W, and the only kit here that takes the 0.4Ω pod for a fully open RDL draw. Suits heavier daily use and fewer charging breaks. Shop the Geekvape Sonder Q3 pod kit.
Which Geekvape Kit Is Right for You?
Your choice comes down to how often you vape, how much power you prefer and which pod resistances you want to use.
| Geekvape Vape Kits | Best for | Battery | Maximum output | Compatible pod resistances |
|---|---|---|---|---|
| Sonder Q2 | A first refillable kit, or a spare to keep in a bag | Compact | Preset | Q Series pods |
| Sonder Q | Newer vapers, light daily use and carrying as a spare | 1000mAh | 20W | 0.6Ω, 0.8Ω and 1.2Ω |
| Sonder Q3 | Regular vaping, longer sessions and fewer charging breaks | 1750mAh | 30W | 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω |
The resistance matters more than the device. A 1.2Ω pod gives a tight, cigarette-like MTL draw at low power; a 0.4Ω pod opens it right up for RDL and needs the wattage the Sonder Q3 provides. If you are unsure, start at 0.8Ω – it sits comfortably in the middle and works across all three kits.
Features That Make Geekvape Kits Better for Daily Use
1. Inhale to Vape
There is no fire button to press before every puff. Simply inhale to activate the device, while the kit matches the power to the fitted pod. This gives you steady flavour without having to adjust the wattage yourself.
2. Adjust the Airflow
Slide the airflow control to tighten the draw for MTL vaping or open it for a looser RDL inhale. You can change the setting at any time, making it easier to find the draw that feels right for you.
3. Swap the Pod, Not the Coil
When the flavour starts to fade, replace the complete Q series cartridge and continue vaping. The coil is already fitted inside the cartridge, so there are no separate coil parts to remove or install.
4. Check Your E-Liquid Level
The transparent pod lets you see how much vape juice is left before you take a puff. Refill it before the wick dries out to help prevent dry hits and a burnt taste.
5. Recharge with USB-C
Top up the battery with a USB-C cable at home, at work or while travelling. The battery indicator shows when power is running low, helping you recharge before the kit cuts out during the day.
Replacement Geekvape Pods for Sonder Kits
Every kit in this collection uses refillable Q Series cartridges, and we stock four formats. Browse Geekvape Pods to compare capacity and filling style.
| Geekvape Q pod | Filling style | Price (3-pack) |
|---|---|---|
| Q Replacement Pods Side Fill 2ml | Sealed port on the side | £3.45 |
| Q Replacement Pods Side Fill 3ml | Sealed port on the side, larger capacity | £3.45 |
| Q Replacement Pods Top Fill 2ml | Port accessed from the top | £6.99 |
Side-Fill or Top-Fill?
Side-fill pods use a sealed port on the side of the cartridge – open the seal, add your vape juice, then close it firmly before refitting. Top-fill pods give you the port from above, which is quicker when you are topping up away from home. Both hold the same built-in coil; the difference is purely how you get liquid in.
Replace your pod when the flavour becomes weaker, vapour production drops or you notice a burnt taste. Keeping a spare cartridge nearby means you can swap it and carry on vaping without replacing the full kit.
More Vape Kits at Local Supplies
- All refillable vape pod kits – 41 devices across every brand we carry.
- Aspire – the Gotek range, the closest comparison to the Sonder series.
- Uwell Caliburn kits – if you want a display and adjustable wattage.
- 10ml nic salts – the e-liquid format that suits these pods best.
- Geekvape Pods – every Q Series cartridge in one place.
Safety and Compliance
| Compliance point | What you need to know |
|---|---|
| Age restriction | Geekvape kits are for adults aged 18 and over only. |
| Nicotine warning | Nicotine-containing vape juice is addictive. Keep all vaping products away from children and pets. |
| Battery safety | Do not use the device if the battery is damaged, swollen or unusually hot. Charge it with a suitable USB-C cable. |
| Responsible recycling | Do not place vape devices or built-in batteries in household waste. Use a vape take-back point or an electrical recycling facility. |
| Official guidance | Read the UK regulations for e-cigarette products. |
Geekvape Kits FAQs
Yes. The Sonder Q, Q2 and Q3 all take Geekvape Q Series cartridges, so a spare pod bought for one works in the others. The Sonder Q3 additionally supports the 0.4Ω pod, which needs more power than the smaller kits provide.
A 50/50 VG/PG e-liquid is a good match for most Q series pods. Nic salts suit a smoother MTL vape, while freebase e-liquid can feel sharper on the throat.
Yes, although some of the previous flavour may remain in the wick. Use separate pods for very different flavours to reduce flavour carry-over.
Remove the pod and wipe the pod bay and contact points with dry tissue or a cotton bud. Do not rinse the device or allow water to enter the battery section.
Leaks can happen if the pod is overfilled, the filling seal is not closed fully or vape juice reaches the airflow channel. Wipe the pod and contacts, leave a small air gap when filling and close the seal firmly.
Check that the battery is charged, the pod is fitted correctly and there's e-liquid in the pod. If it's still not vaping, replace the pod with a new Q series pod.