The Vaporesso XROS Pro 2 is the current flagship in Vaporesso's XROS line, built around a genuinely substantial 2000mAh battery, a 0.96-inch colour display, and Vaporesso's latest COREX 3.0 mesh coil technology. It's a Vaporesso Vape Kit designed for vapers who want real battery longevity and precise control rather than a stripped-back pod system.
This page covers the XROS Pro 2 kit itself alongside its two main pod options: the current-generation Vaporesso XROS COREX 3.0 Replacement Pods and the earlier Vaporesso XROS COREX 2.0 Replacement Pods, both of which keep your device running once the originals wear out.
At a glance:
- 2000mAh built-in battery, up to two consecutive days of vaping per charge
- Kit includes a 0.4Ω and a 0.6Ω COREX 3.0 pod, both 2ml and TPD compliant
- Covers both MTL and RDTL draws, with up to 30W output
- USB-C charging takes the battery from flat to full in under 30 minutes
- 65g aerospace-grade aluminium alloy body in ten colour finishes
- COREX 3.0 pods sold in packs of four, in five resistances from 0.4Ω to 1.2Ω
Key Features & Benefits
Battery Capacity
The XROS Pro 2 runs on a 2000mAh built-in battery, genuinely large for a pod kit of this size, delivering up to two consecutive days of vaping on a single charge for most users. It's non-removable, so the whole device charges as one unit rather than needing spare cells.
Pod Capacity
Every XROS Pro 2 pod holds 2ml of e-liquid, the standard UK TPD limit for a refillable pod. The kit ships with two pods, a 0.4Ω and a 0.6Ω, both using COREX 3.0 mesh technology and a top-filling clamshell design that lets you refill without removing the pod from the device.
Vaping Style
The XROS Pro 2 covers both MTL (mouth-to-lung) and RDTL (restricted direct-to-lung) draws, depending on which pod and wattage you choose. The 0.4Ω pod leans toward a looser, more open RDTL pull at up to 25W, while the higher-resistance pods in the wider range deliver a tighter, cigarette-style MTL draw.
Charging Type
USB-C charging at 5V/2A brings the 2000mAh battery from flat to full in under 30 minutes, genuinely fast for a battery this size. The included Type-C cable means you're ready to charge straight out of the box.
Airflow & Power Control
A stepless airflow slider lets you fine-tune the draw with pinpoint accuracy, while the wattage dial adjusts output in precise 0.5W increments, shown to the decimal on the display. This finer control is only available on the pre-installed 0.4Ω pod; other resistances in the range run at a fixed recommended wattage.
Display & Navigation
The 0.96-inch colour TFT screen shows wattage, resistance and puff data clearly, with one-button navigation keeping the interface simple despite the added precision controls.
Design & Portability
Built from aerospace-grade aluminium alloy and weighing just 65g, the XROS Pro 2 stays genuinely pocketable despite its larger battery. It's available in ten finishes, from Storm Blue and Gem Green through to the Glittering and Sunlight colourways, and includes an accident-proof lock to prevent the device firing in a bag or pocket.
Compliance
The XROS Pro 2 and its pods are TPD compliant, with every pod capped at the standard 2ml UK limit regardless of resistance or draw style.
Ease of Use
The kit arrives ready to vape with one pod pre-installed and a spare in the box. Refilling is top-fill only, so there's no need to remove the pod from the device, and switching resistances is as simple as swapping pods.
Explore The Vaporesso XROS Pro 2 Range
- Vaporesso XROS Pro 2 Vape Kit The complete starter kit: a 2000mAh device with both a 0.4Ω and 0.6Ω COREX 3.0 pod included, ten colour options and up to 30W output. The natural choice for anyone wanting the latest XROS technology with the longest battery life in the current range. Browse the wider Vaporesso Vape Kits range to compare it against other XROS devices.
- Vaporesso XROS COREX 3.0 Replacement Pods The current-generation pod, sold in packs of four across five resistance options from 0.4Ω up to 1.2Ω. These feature Vaporesso's Hive Mesh coil structure and SSS Leak-resistant technology, and are compatible with the XROS Pro 2 as well as most other current XROS kits.
- Vaporesso XROS COREX 2.0 Replacement Pods The previous-generation pod technology, still compatible with earlier XROS devices such as the original XROS Pro and XROS 3 Mini. If you're running an older XROS kit rather than the Pro 2, these remain the correct pods to look for rather than the newer COREX 3.0 generation.
For the wider brand, browse Vaporesso for the full catalogue of kits, pods, coils and e-liquids.
COREX 3.0 Resistance Guide
| Resistance | Recommended Wattage | Draw Style | Compatible Devices |
|---|---|---|---|
| 0.4Ω | Up to 25W | RDTL (looser draw) | XROS 4, 5, 6, XROS 4/5/6 Mini, XROS Pro & Pro 2 only |
| 0.6Ω | 21W | RDTL | Most current XROS kits (not XROS Mini Retro) |
| 0.8Ω | 16W | MTL | Full XROS range |
| 1.0Ω | 12W | MTL | Full XROS range |
| 1.2Ω | 10W | MTL (tightest draw) | Full XROS range |
The 0.4Ω and 0.6Ω pods are tuned for a sweeter, more open experience and suit freebase e-liquid particularly well, while the 0.8Ω to 1.2Ω pods are better matched to nic salts and a tighter cigarette-style pull. For nic salt options built for this draw style, browse Vaporesso Nic Salts.
Choosing Between COREX 2.0 and COREX 3.0
| Feature | COREX 2.0 | COREX 3.0 |
|---|---|---|
| Coil Structure | Standard mesh | Hive Mesh, optimised chimney design |
| Compatible Devices | Older XROS kits (XROS Pro original, XROS 3 Mini) | Current XROS range including Pro 2 |
| Leak Resistance | Standard | SSS Leak-resistant technology |
| Filling | Top-fill clamshell | Top-fill clamshell |
If you're unsure which generation your device takes, check the resistance marking on your current pod against the compatibility notes above, or browse Vaporesso Pods to compare both generations side by side. For coil-specific technical details, Vaporesso Coils covers the wider COREX coil family.
How To Use the XROS Pro 2
- Charge the device fully via the included USB-C cable before first use.
- Insert either the pre-installed 0.4Ω pod or swap in the 0.6Ω pod from the box, depending on your preferred draw.
- Top up the pod through the clamshell fill port; no need to remove it from the device.
- Adjust the airflow slider to your preferred tightness, and set wattage via the dial if using the 0.4Ω pod.
- Draw gently to activate, checking the TFT display for wattage, resistance, and battery level.
- Recharge via USB-C when the battery runs low; a full charge takes under 30 minutes.
- Replace the pod once flavour fades, choosing a resistance from the Vaporesso Pods range to suit your draw.
Other Vaporesso XROS Kits Worth Comparing
If you want to see how the XROS Pro 2 stacks up against other devices in the lineup:
| Feature | XROS Pro 2 | XROS 6 |
|---|---|---|
| Battery | 2000mAh | 1800mAh |
| Output | Up to 30W | Variable |
| Display | 0.96" colour TFT | Standard display |
| Pod Compatibility | COREX 3.0 (0.4Ω included) | COREX 3.0 |
| Best For | Maximum battery life and precise control | Smooth all-round everyday vaping |
Browse the full Vaporesso Vape Kits range to compare further.
Frequently Asked Questions
How long does the XROS Pro 2 battery last?
Up to two consecutive days of typical vaping on a single charge, thanks to its 2000mAh battery.
What pods come with the XROS Pro 2?
One 0.4Ω COREX 3.0 pod pre-installed and a spare 0.6Ω pod included in the box.
Can I use COREX 2.0 pods in the XROS Pro 2?
No, the XROS Pro 2 is designed for COREX 3.0 pods; COREX 2.0 pods are intended for older XROS devices.
Is the XROS Pro 2 suitable for nic salts or freebase?
Both. The 0.8Ω to 1.2Ω pods suit nic salts, while the 0.4Ω and 0.6Ω pods are better matched to freebase e-liquid.
How long does the XROS Pro 2 take to charge?
Under 30 minutes for a full charge via USB-C.
What's the difference between MTL and RDTL on the XROS Pro 2?
Higher resistance pods (0.8Ω to 1.2Ω) give a tighter MTL draw, while lower resistance pods (0.4Ω and 0.6Ω) give a looser, more open RDTL pull.
Are XROS COREX 3.0 pods compatible with every XROS kit?
No, the 0.4Ω pod specifically is only compatible with the XROS 4, 5, 6, their Mini versions, and the XROS Pro and Pro 2; it's not compatible with the XROS Mini Retro.
Is the XROS Pro 2 TPD compliant?
Yes, every pod is capped at the standard 2ml UK limit.