Pyne Pod Click S 30K

Pyne Pod's Click S 30K takes a genuinely different approach to flavour switching than most big-puff kits. Instead of removing one pod to insert another, the Click S 30K holds two flavours loaded at once, and a simple twist of the mouthpiece instantly switches between them. 

A 900mAh battery, mesh coil pods, and an LED display combine with a 2 x 1ml pod and 2 x 8ml refill container system for up to 30,000 puffs, all at 20mg nic salt. It's part of the wider Pyne Pod Click ecosystem, meaning the pods here work across other Click devices too, including the larger Pyne Pod Click 50K Prefilled Pod Vape Kit.

Key Features & Benefits

Battery Capacity

The Click S 30K runs on a 900mAh battery, genuinely larger than the capacity found in Pyne Pod's own 50K device, despite delivering a lower total puff count. That extra capacity accounts for the power draw of the twist mechanism and LED screen, and it means a full day of MTL vaping is realistic for most users before a recharge is needed.

Nicotine Strength

Every Click S 30K pod, whether bought as part of the starter kit or as a standalone replacement, is prefilled with 20mg nic salt, the maximum strength permitted under UK regulations. Both flavours loaded into the device share this same strength, so switching flavour never means switching nicotine hit.

Pod Capacity

Each kit uses two 1ml prefilled pods, each backed by its own 8ml refill container, for 18ml of total e-liquid across the two loaded flavours. That's a genuinely different structure to a standard single-pod kit; rather than one larger reservoir, you get two smaller, independent supplies running in parallel.

Puff Count

Rated for up to 30,000 puffs in Regular Mode, drawing from both pods and their refill containers combined. Switching to Boost Mode trades some of that total count for a stronger, more intense hit, since the higher wattage uses more liquid and battery per puff.

Vaping Style

The Click S 30K delivers a proper MTL (mouth-to-lung) draw, with mesh coils fitted in every pod for even heat distribution and consistent flavour from the first puff to the last. It's draw-activated, so there's no button to hold down to fire the device, only to switch its mode.

Charging Type

USB-C charging brings the Click S 30K's larger 900mAh battery to full in under 30 minutes, genuinely faster than the smaller-battery Click 50K, thanks to a more efficient charging circuit. The cable isn't included in the box.

Compliance

The Click S 30K is fully TPD compliant and UK legal, with each 1ml pod and 8ml refill container observing standard tank limits and the nicotine strength capped at the UK legal maximum of 20mg.

Design & Portability

Despite the added twist mechanism and larger battery, the Click S 30K keeps a pocket-friendly shape, with an LED screen on the front showing battery level, puff count, and active mode at a glance.

Ease of Use

No coil priming, no manual refilling, and no complicated menus. Click both pods into the base, slide it onto the battery, remove the mouthpiece plug, and inhale to vape. Switching flavour is a simple twist; switching power mode is a double click of the front button.

The Twist-to-Switch Dual Flavour System

The defining feature of the Click S 30K is how it handles flavour switching. On the Pyne Pod Click 50K, changing flavour means physically pulling one pod out and clicking in another. The Click S 30K skips that step entirely: both pods stay loaded in the device at once, and turning the mouthpiece one way draws from the first flavour, turning it the other way switches to the second. 

Nothing needs removing, nothing needs swapping, and there's no interruption to your session. It's a genuinely useful setup for anyone who likes alternating between a fruit flavour and a menthol through the day, or simply doesn't want to commit to one taste at a time.

Regular Mode vs Boost Mode

Regular Mode is the default, running cooler and stretching the 18ml of e-liquid as far as possible. Boost Mode doubles the wattage for a fuller draw and more intense flavour, at the cost of faster battery and liquid use. Switch between the two by double-clicking the button on the front of the device; the LED screen shows R for Regular or B for Boost so you always know which setting is active.

Explore Pyne Pod Click S 30K Range

Pyne Pod Click S 30K Prefilled Pod Kit

The complete starter kit: a 900mAh rechargeable device with two prefilled 1ml pods and their 8ml refill containers already fitted, ready to vape straight from the box across 15 dual-flavour editions.

Pyne Pod Click S 30K Replacement Pods

Once your originals run dry, pick up a fresh pair of pods in your chosen edition rather than buying a new device. These use the same mesh coil, magnetic click-fit format as the kit's originals, and because the Click range is cross-compatible, they also work in the Pyne Pod Click 50K Prefilled Pod Vape Kit if you own one. Browse Pyne Pod Refills for the current flavour selection.

Pyne Pod Nic Salts 10ml 20mg

For those who'd rather skip the prefilled pod system entirely, Pyne Pod Nic Salts 10ml 20mg brings the same flavour recipes into a standard bottle, usable in any compatible MTL pod kit rather than being tied to Click hardware.

Wider Pyne Pod Kits

Browse the full Pyne Pod Kits range to compare the Click S 30K against other devices in the lineup, including the higher-capacity Click 50K.

Pyne Pod Click S 30K Nicotine Strength

Pyne Pod Click S 30K Flavour Editions

Each edition pairs two complementary flavours, one per pod, switchable via the twist mouthpiece.

All fifteen editions use 20mg nic salt across both flavours.

How To Set Up the Pyne Pod Click S 30K

1. Charge the kit fully via USB-C before first use (cable not included in the box).

2. Remove all rubber plugs and stickers from the pods and refill containers.

3. Click the two 8ml refill containers into the base of the pod unit until they snap into place.

4. Slide the assembled pod unit onto the battery base and press down firmly to secure it.

5. Remove the mouthpiece plug.

6. Inhale through the mouthpiece to start vaping.

7. To switch flavour, simply turn the mouthpiece; one direction for flavour one, the other for flavour two.

8. To switch power mode, double-click the button on the front of the device and check the LED screen for R or B.

Pyne Pod Click Pod Compatibility

The Click S 30K shares its pod ecosystem with the rest of the Pyne Pod Click range.

Because pods from across the 10K, 30K and 50K ranges are cross-compatible, owning a Click S 30K battery gives you access to the full Pyne Pod Click pod catalogue, not just the dual-flavour editions.

Frequently Asked Questions

How do I switch flavours on the Click S 30K?

Simply twist the mouthpiece; both pods stay loaded at once, so there's nothing to remove or swap.

How many puffs does the Click S 30K give?

Up to 30,000 puffs in Regular Mode, with a lower total in Boost Mode due to the higher power draw.

What's the difference between the Click S 30K and Click 50K?

The S 30K offers dual-flavour switching from two smaller pods and a larger 900mAh battery, while the 50K offers three separate single-flavour pods, a smaller 750mAh battery, and a higher total of 50,000 puffs.

Can I use Click 50K pods in the Click S 30K device?

Yes, pods across the Click 10K, 30K, and 50K ranges are cross-compatible with any Click battery.

What nicotine strength is the Click S 30K?

20mg nic salt across every pod, replacement pod, and the standalone Pyne Pod Nic Salts.

How long does the Click S 30K take to charge?

Under 30 minutes via USB-C, faster than the Click 50K thanks to its larger, more efficient battery.

Is the Click S 30K TPD compliant?

Yes, it's fully TPD compliant and legal for UK sale.

Do I need to buy a new device when my pods run out?

No, just pick up a fresh pair of Pyne Pod Click S 30K Replacement Pods in your preferred edition and click them into your existing device.